IIT Exam 2010 Syllabus | IIT Exam Syllabus | IIT JEE 2010 Syllabus | IITJEE Syllabus

SYLLABUS FOR JEE-2010 CHEMISTRY Physical Chemistry

General topics: Concept of atoms and molecules; Dalton’s atomic theory; Mole concept; Chemical formulae; Balanced chemical equations; Calculations (based on mole concept) involving common oxidation-reduction, neutralisation, and displacement reactions; Concentration in terms of mole fraction, molarity, molality and normality.

Gaseous and liquid states: Absolute scale of temperature, ideal gas equation; Deviation from ideality, van der Waals equation; Kinetic theory of gases, average, root mean square and most probable velocities and their relation with temperature; Law of partial pressures; Vapour pressure; Diffusion of gases.

Atomic structure and chemical bonding: Bohr model, spectrum of hydrogen atom, quantum numbers; Wave-particle duality, de Broglie hypothesis; Uncertainty principle; Qualitative quantum mechanical picture of hydrogen atom, shapes of s, p and d orbitals; Electronic configurations of elements (up to atomic number 36); Aufbau principle; Pauli’s exclusion principle and Hund’s rule; Orbital overlap and covalent bond; Hybridisation involving s, p and d orbitals only; Orbital energy diagrams for homonuclear diatomic species; Hydrogen bond; Polarity in molecules, dipole moment (qualitative aspects only); VSEPR model and shapes of molecules (linear, angular, triangular, square planar, pyramidal, square pyramidal, trigonal bipyramidal, tetrahedral and octahedral).

Energetics: First law of thermodynamics; Internal energy, work and heat, pressure-volume work; Enthalpy, Hess’s law; Heat of reaction, fusion and vapourization; Second law of thermodynamics; Entropy; Free energy; Criterion of spontaneity.

Chemical equilibrium: Law of mass action; Equilibrium constant, Le Chatelier’s principle (effect of concentration, temperature and pressure); Significance of DG and DGo in chemical equilibrium; Solubility product, common ion effect, pH and buffer solutions; Acids and bases (Bronsted and Lewis concepts); Hydrolysis of salts. Electrochemistry: Electrochemical cells and cell

reactions; Standard electrode potentials; Nernst equation and its relation to DG; Electrochemical series, emf of galvanic cells; Faraday’s laws of electrolysis; Electrolytic conductance, specific, equivalent and molar conductivity, Kohlrausch’s law; Concentration cells.

Chemical kinetics: Rates of chemical reactions; Order of reactions; Rate constant; First order reactions;

Temperature dependence of rate constant (Arrhenius equation). Solid state: Classification of solids, crystalline state, seven crystal systems (cell parameters a, b, c, α, β, γ), close packed structure of solids (cubic), packing in fcc, bcc and hcp lattices; Nearest neighbours, ionic radii, simple ionic compounds, point defects.

Solutions: Raoult’s law; Molecular weight determination from lowering of vapour pressure, elevation of boiling point and depression of freezing point.

Surface chemistry: Elementary concepts of adsorption (excluding adsorption isotherms); Colloids: types, methods of preparation and general properties; Elementary ideas of emulsions, surfactants and micelles (only definitions and examples).

Nuclear chemistry: Radioactivity: isotopes and isobars; Properties of α, β andγ rays; Kinetics of radioactive decay (decay series excluded), carbon dating; Stability of nuclei with respect to proton-neutron ratio; Brief discussion on fission and fusion reactions.

Inorganic Chemistry Isolation/preparation and properties of the following non-metals: Boron, silicon, nitrogen, phosphorus, oxygen, sulphur and halogens; Properties of allotropes of carbon (only diamond and graphite), phosphorus and sulphur.

Preparation and properties of the following compounds: Oxides, peroxides, hydroxides, carbonates, bicarbonates, chlorides and sulphates of sodium, potassium, magnesium and calcium; Boron: diborane, boric acid and borax; Aluminium: alumina, aluminium chloride and alums; Carbon: oxides and oxyacid (carbonic acid); Silicon: silicones, silicates and silicon carbide; Nitrogen: oxides, oxyacids and ammonia; Phosphorus: oxides, oxyacids (phosphorus acid, phosphoric acid) and phosphine; Oxygen: ozone and hydrogen peroxide; Sulphur: hydrogen sulphide, oxides, sulphurous acid, sulphuric acid and sodium thiosulphate; Halogens: hydrohalic acids, oxides and oxyacids of chlorine, bleaching powder; Xenon fluorides.

Transition elements (3d series): Definition, general characteristics, oxidation states and their stabilities, colour (excluding the details of electronic transitions) and calculation of spin-only magnetic moment; Coordination compounds: nomenclature of mononuclear coordination compounds, cis-trans and ionisation isomerisms, hybridization and geometries of mononuclear coordination compounds (linear, tetrahedral, square planar and octahedral).

Preparation and properties of the following compounds: Oxides and chlorides of tin and lead; Oxides, chlorides and sulphates of Fe2+, Cu2+ and Zn2+; Potassium permanganate, potassium dichromate, silver oxide, silver nitrate, silver thiosulphate.

Ores and minerals: Commonly occurring ores and minerals of iron, copper, tin, lead, magnesium, aluminium, zinc and silver.

Extractive metallurgy: Chemical principles and reactions only (industrial details excluded); Carbon reduction method (iron and tin); Self reduction method (copper and lead); Electrolytic reduction method (magnesium and aluminium); Cyanide process (silver and gold).

Principles of qualitative analysis: Groups I to V (only Ag+, Hg2+, Cu2+, Pb2+, Bi3+, Fe3+, Cr3+, Al3+, Ca2+, Ba2+, Zn2+, Mn2+ and Mg2+); Nitrate, halides (excluding fluoride), sulphate and sulphide.

Organic Chemistry Concepts: Hybridisation of carbon; Sigma and pi-bonds; Shapes of simple organic molecules; Structural and geometrical isomerism; Optical isomerism of compounds containing up to two asymmetric centres, (R,S and E,Z nomenclature excluded); IUPAC nomenclature of simple organic compounds (only hydrocarbons, mono-functional and bi-functional compounds); Conformations of ethane and butane (Newman projections); Resonance and hyperconjugation; Keto-enol tautomerism; Determination of empirical and molecular formulae of simple compounds (only combustion method); Hydrogen bonds: definition and their effects on physical properties of alcohols and carboxylic acids; Inductive and resonance effects on acidity and basicity of organic acids and bases; Polarity and inductive effects in alkyl halides; Reactive intermediates produced during homolytic and heterolytic bond cleavage; Formation, structure and stability of carbocations, carbanions and free radicals.

Preparation, properties and reactions of alkanes:

Homologous series, physical properties of alkanes (melting points, boiling points and density); Combustion and halogenation of alkanes; Preparation of alkanes by Wurtz reaction and decarboxylation reactions.

Preparation, properties and reactions of alkenes and alkynes: Physical properties of alkenes and alkynes (boiling points, density and dipole moments); Acidity of alkynes; Acid catalysed hydration of alkenes and alkynes (excluding the stereochemistry of addition and elimination); Reactions of alkenes with KMnO4 and ozone; Reduction of alkenes and alkynes; Preparation of alkenes and alkynes by elimination reactions; Electrophilic addition reactions of alkenes with X2, HX, HOX and H2O (X=halogen); Addition reactions of alkynes; Metal acetylides.

Reactions of benzene: Structure and aromaticity; Electrophilic substitution reactions: halogenation, nitration, sulphonation, Friedel-Crafts alkylation and acylation; Effect of o-, m-and p-directing groups in monosubstituted benzenes.

Phenols: Acidity, electrophilic substitution reactions (halogenation, nitration and sulphonation); Reimer-Tieman reaction, Kolbe reaction.

Characteristic reactions of the following (including those mentioned above): Alkyl halides: rearrangement reactions of alkyl carbocation, Grignard reactions, nucleophilic substitution reactions; Alcohols: esterification, dehydration and oxidation, reaction with sodium, phosphorus halides, ZnCl2/concentrated HCl, conversion of alcohols into aldehydes and ketones; Ethers:Preparation by Williamson’s Synthesis; Aldehydes and Ketones: oxidation, reduction, oxime and hydrazone formation; aldol condensation, Perkin reaction; Cannizzaro reaction; haloform reaction and nucleophilic addition reactions (Grignard addition); Carboxylic acids: formation of esters, acid chlorides and amides, ester hydrolysis; Amines: basicity of substituted anilines and aliphatic amines, preparation from nitro compounds, reaction with nitrous acid, azo coupling reaction of diazonium salts of aromatic amines, Sandmeyer and related reactions of diazonium salts; carbylamine reaction; Haloarenes: nucleophilic aromatic substitution in haloarenes and substituted haloarenes (excluding Benzyne mechanism and Cine substitution).

Carbohydrates: Classification; mono- and di-saccharides (glucose and sucrose); Oxidation, reduction, glycoside formation and hydrolysis of sucrose.

Amino acids and peptides: General structure (only primary structure for peptides) and physical properties.

Properties and uses of some important polymers:

Natural rubber, cellulose, nylon, teflon and PVC. Practical organic chemistry: Detection of elements (N, S, halogens); Detection and identification of the following functional groups: hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketone), carboxyl, amino and nitro; Chemical methods of separation of mono-functional organic compounds from binary mixtures.

MATHEMATICS Algebra: Algebra of complex numbers, addition, multiplication, conjugation, polar representation, properties of modulus and principal argument, triangle inequality,

cube roots of unity, geometric interpretations. Quadratic equations with real coefficients, relations between roots and coefficients, formation of quadratic equations with given roots, symmetric functions of roots.

Arithmetic, geometric and harmonic progressions, arithmetic, geometric and harmonic means, sums of finite arithmetic and geometric progressions, infinite geometric series, sums of squares and cubes of the first n natural numbers.

Logarithms and their properties.

Permutations and combinations, Binomial theorem for a positive integral index, properties of binomial coefficients. Matrices as a rectangular array of real numbers, equality

of matrices, addition, multiplication by a scalar and product of matrices, transpose of a matrix, determinant of a square matrix of order up to three, inverse of a square matrix of order up to three, properties of these matrix operations, diagonal, symmetric and skew-symmetric matrices and their properties, solutions of simultaneous linear equations in two or three variables.

Addition and multiplication rules of probability, conditional probability, Bayes Theorem, independence of events, computation of probability of events using permutations and combinations.

Trigonometry: Trigonometric functions, their periodicity and graphs, addition and subtraction formulae, formulae involving multiple and sub-multiple angles, general solution of trigonometric equations.

Relations between sides and angles of a triangle, sine rule, cosine rule, half-angle formula and the area of a triangle, inverse trigonometric functions (principal value only).

Analytical geometry:

Two dimensions: Cartesian coordinates, distance between two points, section formulae, shift of origin. Equation of a straight line in various forms, angle between

two lines, distance of a point from a line; Lines through the point of intersection of two given lines, equation of the bisector of the angle between two lines, concurrency of lines; Centroid, orthocentre, incentre and circumcentre of a triangle.

Equation of a circle in various forms, equations of tangent,

normal and chord. Parametric equations of a circle, intersection of a circle with a straight line or a circle, equation of a circle through the points of intersection of two circles and those of a circle and a straight line.

Equations of a parabola, ellipse and hyperbola in standard form, their foci, directrices and eccentricity, parametric equations, equations of tangent and normal.

Locus Problems. Three dimensions: Direction cosines and direction

ratios, equation of a straight line in space, equation of a plane, distance of a point from a plane. Differential calculus: Real valued functions of a real

variable, into, onto and one-to-one functions, sum, difference, product and quotient of two functions, composite functions, absolute value, polynomial, rational, trigonometric, exponential and logarithmic functions.

Limit and continuity of a function, limit and continuity of the sum, difference, product and quotient of two functions, L’Hospital rule of evaluation of limits of functions.

Even and odd functions, inverse of a function, continuity of composite functions, intermediate value property of continuous functions.

Derivative of a function, derivative of the sum, difference, product and quotient of two functions, chain rule, derivatives of polynomial, rational, trigonometric, inverse trigonometric, exponential and logarithmic functions.

Derivatives of implicit functions, derivatives up to order two, geometrical interpretation of the derivative, tangents and normals, increasing and decreasing functions, maximum and minimum values of a function, Rolle’s Theorem and Lagrange’s Mean Value Theorem.

Integral calculus: Integration as the inverse process of differentiation, indefinite integrals of standard functions, definite integrals and their properties, Fundamental Theorem of Integral Calculus.

Integration by parts, integration by the methods of substitution and partial fractions, application of definite integrals to the determination of areas involving simple curves.

Formation of ordinary differential equations, solution of homogeneous differential equations, separation of variables method, linear first order differential equations.

Vectors: Addition of vectors, scalar multiplication, dot and cross products, scalar triple products and their geometrical interpretations.

PHYSICS General: Units and dimensions, dimensional analysis; least count, significant figures; Methods of measurement and error analysis for physical quantities pertaining to the following experiments: Experiments based on using Vernier calipers and screw gauge (micrometer), Determination of g using simple pendulum, Young’s modulus by Searle’s method, Specific heat of a liquid using calorimeter, focal length of a concave mirror and a convex lens using u-v method, Speed of sound using resonance column, Verification of Ohm’s law using voltmeter and ammeter, and specific resistance of the material of a wire using meter bridge and post office box.

Mechanics: Kinematics in one and two dimensions (Cartesian coordinates only), projectiles; Uniform Circular motion; Relative velocity.

Newton’s laws of motion; Inertial and uniformly accelerated frames of reference; Static and dynamic friction; Kinetic and potential energy; Work and power; Conservation of linear momentum and mechanical energy.

Systems of particles; Centre of mass and its motion;

Impulse; Elastic and inelastic collisions. Law of gravitation; Gravitational potential and field; Acceleration due to gravity; Motion of planets and satellites in circular orbits; Escape velocity.

Rigid body, moment of inertia, parallel and perpendicular axes theorems, moment of inertia of uniform bodies with simple geometrical shapes; Angular momentum; Torque; Conservation of angular momentum; Dynamics of rigid bodies with fixed axis of rotation; Rolling without slipping of rings, cylinders and spheres; Equilibrium of rigid bodies; Collision of point masses with rigid bodies.

Linear and angular simple harmonic motions. Hooke’s law, Young’s modulus. Pressure in a fluid; Pascal’s law; Buoyancy; Surface

energy and surface tension, capillary rise; Viscosity (Poiseuille’s equation excluded), Stoke’s law; Terminal velocity, Streamline flow, equation of continuity, Bernoulli’s theorem and its applications.

Wave motion (plane waves only), longitudinal and transverse waves, superposition of waves; Progressive and stationary waves; Vibration of strings and air columns; Resonance; Beats; Speed of sound in gases; Doppler effect (in sound).

Thermal physics: Thermal expansion of solids, liquids and gases; Calorimetry, latent heat; Heat conduction in one dimension; Elementary concepts of convection and radiation; Newton’s law of cooling; Ideal gas laws; Specific heats (Cv and Cp for monoatomic and diatomic gases); Isothermal and adiabatic processes, bulk modulus of gases; Equivalence of heat and work; First law of thermodynamics and its applications (only for ideal gases); Blackbody radiation: absorptive and emissive powers; Kirchhoff’s law; Wien’s displacement law, Stefan’s law.

Electricity and magnetism: Coulomb’s law; Electric field and potential; Electrical potential energy of a system of point charges and of electrical dipoles in a uniform electrostatic field; Electric field lines; Flux of electric field; Gauss’s law and its application in simple cases, such as, to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell.

Capacitance; Parallel plate capacitor with and without dielectrics; Capacitors in series and parallel; Energy stored in a capacitor.

Electric current; Ohm’s law; Series and parallel arrangements of resistances and cells; Kirchhoff’s laws and simple applications; Heating effect of current.

Biot–Savart’s law and Ampere’s law; Magnetic field near a current-carrying straight wire, along the axis of a circular coil and inside a long straight solenoid; Force on a moving charge and on a current-carrying wire in a uniform magnetic field.

Magnetic moment of a current loop; Effect of a uniform magnetic field on a current loop; Moving coil galvanometer, voltmeter, ammeter and their conversions.

Electromagnetic induction: Faraday’s law, Lenz’s law; Self and mutual inductance; RC, LR and LC circuits with d.c. and a.c. sources.

Optics: Rectilinear propagation of light; Reflection and refraction at plane and spherical surfaces; Total internal reflection; Deviation and dispersion of light by a prism; Thin lenses; Combinations of mirrors and thin lenses; Magnification.

Wave nature of light: Huygen’s principle, interference

limited to Young’s double-slit experiment. Modern physics: Atomic nucleus; Alpha, beta and gamma radiations; Law of radioactive decay; Decay constant; Half-life and mean life; Binding energy and its calculation; Fission and fusion processes; Energy calculation in these processes.

Photoelectric effect; Bohr’s theory of hydrogen-like atoms; Characteristic and continuous X-rays, Moseley’s law; de Broglie wavelength of matter waves.


and B.Des. PROGRAMMES Freehand drawing: This would comprise of simple drawing depicting the total object in its right form and proportion, surface texture, relative location and details of its component parts in appropriate scale. Common domestic or day-to-day life usable objects like furniture, equipment, etc., from memory. Geometrical drawing: Exercises in geometrical drawing containing lines, angles, triangles, quadrilaterals, polygons, circles etc. Study of plan (top view), elevation (front or side views) of simple solid objects like prisms, cones, cylinders, cubes, splayed surface holders etc.

Three-dimensional perception: Understanding and appreciation of three-dimensional forms with building elements, colour, volume and orientation. Visualization through structuring objects in memory.

Imagination and aesthetic sensitivity: Composition exercise with given elements. Context mapping. Creativity check through innovative uncommon test with familiar

objects. Sense of colour grouping or application. Architectural awareness: General interest and awareness of famous architectural creations – both national and international, places and personalities (architects, designers etc.) in the related domain.

Candidates are advised to bring geometry box sets, pencils, erasers and colour pencils or crayons for the Aptitude Test.

IIT Exam 2010 Counselling | IIT Exam Admission | IIT JEE 2010 | IITJEE

1. Counselling

The details of courses available in participating institutes are given in APPENDIX-7. Some institutes may offer new courses not listed in the appendix. Information regarding these courses will be available at the time of counselling.

The seats in various courses of the institutes (IITs, IT-BHU and ISM Dhanbad) are allotted strictly on the basis of the AIR, category rank, and the choices of each qualified student submitted either On-line or Off-line at the time of counselling.

The details of the counselling and admission procedure will be published in the JEE websites and in the Counselling Brochure.

The results of JEE are also being used by other institutions for admissions to their courses / programmes. The names of these institutions will be published in the JEE website at a later date. Therefore JEE provides performance data for these institutions. Candidates should contact these institutions directly for admission.

2. Physical Fitness

Candidates who qualify in JEE-2010 will have to submit a physical fitness certificate from a registered medical practitioner in the prescribed format that will be made available at an appropriate time. Candidates will be admitted only if they are physically fit for pursuing a course of study at the participating institutes.

3. Requirements for Mining courses

Those who opt for Mining Engineering and Mining Machinery courses should make sure that they do not have any form of colour blindness. They will be required to submit a certificate from a registered medical practitioner to this effect at the time of counselling/admission. The standards of visual acuity with or without glasses will be adhered to strictly for candidates seeking admission to Mining Engineering as per DGMS Circular 14 of 1972. Persons with one-eyed vision are not permitted to work underground. Candidates with the above limitations are not allowed to opt for admission to Mining Engineering or Mining Machinery Engineering.

4. Female candidates for Mining courses

Section 46 (1) of the Mines Act, 1952 states that “No woman shall, notwithstanding anything contained in any other law, be employed (a) in any part of a mine which is below ground, (b) in any mine above ground except between the hours 6 a.m. and 7 p.m.”. Hence, female candidates are not admitted to Mining Engineering and Mining Machinery Engineering at ISM, Dhanbad, whereas the corresponding programmes at IIT Kharagpur and IT-BHU, Varanasi, have no such restriction.

5. Aptitude test for B. Arch. and B. Des.

Candidates desirous of joining the B. Arch. (Architecture) and B. Des. (Design) courses will be required to qualify in an aptitude test to be conducted at each counselling institute on June 10, 2010.

The test will consist of one paper of three hours duration from 09.00 AM to 12.00 noon. Candidates have to qualify in the Aptitude Test to become eligible for admission to either B. Arch. or B. Des. courses. Question papers for aptitude test for B. Arch. and B. Des. will be in English only.

Candidates can register for this Aptitude test On-line after May 26, 2010. They must appear for the test on June 10, 2010 at the institutes where counselling will be held.

IIT Exam 2010 Results | IIT Exam Results | IIT JEE 2010 Results | IITJEE

1. Performance in JEE-2010

The answer paper of JEE-2010 is a machine-gradable Optical Response Sheet (ORS). These sheets are scrutinized and graded with extreme care after the examination. There is NO provision for re-grading and re-totalling. No photocopies of the machine-gradable sheets will be made available. No correspondence in this regard will be entertained.

Candidates will get to know their All India Ranks (AIR) / Category ranks through our websites/SMS/IVRS on

May 26, 2010.

Candidates can view their performance in JEE-2010 from JEE websites from June 3, 2010.

2. Ranking Only those candidates who attempted both Paper-I and Paper-II will be considered for the ranking. Marks in Chemistry in JEE will be equal to marks in Chemistry section of Paper-I plus marks in Chemistry section of Paper-II. Similar procedure will be followed for Mathematics and Physics. The sum of the marks obtained

in the individual subjects in JEE will be the aggregate mark for the candidate. The average of the marks scored by all such candidates

will be computed for each of the three subjects. These will be the Minimum Qualifying Marks for Ranking (MQMR) in the individual subjects.

Based on the MQMR in the individual subjects as well as the aggregate marks in the examination, a Common Merit List (CML) will be prepared without any relaxed criteria, such that the number of candidates in this list is equal to the total number of seats available in all the participating institutes put together. The aggregate marks scored by the last candidate in the CML will be the CML cut-off score (CCS).

Next, the merit list of the OBC candidates will be prepared. If the number of OBC candidates in the CML is equal to or more than 1.4 times the number of available OBC seats, then the OBC merit list will contain all these candidates.

In case the number of OBC candidates qualified in the CML is less than 1.4 times the number of available OBC seats, then relaxation (maximum of 10%) to the individual MQMR as well as to the CCS will be applied, and an OBC merit list will be prepared, in which the number of candidates will be at most 1.4 times the number of available OBC seats.

By applying 50% relaxation to the individual MQMR as well as to the CCS, separate merit list for SC, ST and PD candidates will be prepared. The number of candidates in each of these lists will be, at most 1.4 times the number of available seats in the respective categories.

While preparing the merit lists, if a candidate belongs to more than one category/ subcategory of relaxed norms, then he/she for the purpose of ranking shall be considered in all the categories in which he/she qualifies.

There will be no separate waiting list for candidates.

3. Tie-break

The tie-break criterion in the CML and category lists adopted for awarding ranks to the candidates who have scored the same aggregate marks is as follows:

For each subject, the average marks will be calculated on the basis of the marks obtained by those candidates who have scored more than or equal to MQMR in that subject.

Among the candidates having the same aggregate marks, a candidate will be ranked higher than the rest, if he/she has scored higher marks in the subject having the lowest average marks calculated as above. If there is a tie after this procedure, then the marks obtained by the tied candidates in the subject with the second-lowest average marks will be considered, and the above procedure will be repeated. Candidates tied even after this procedure will be given the same rank.

4. Preparatory course

A further relaxation of 50% is given based on the aggregate mark of the last candidate in the SC, ST and PD category merit lists. Separate preparatory course lists will be prepared for SC, ST and PD by including the candidates meeting this further relaxation. The number of candidates in these lists will be limited to 1.5 times the number of seats remaining vacant after exhausting the

respective categories.

IIT Exam 2010 Admit card | IIT Exam Admit| IIT JEE 2010 Hall Ticket | IITJEE

The admit card will bear the name, application number, registration number, photograph, signature, date of birth, address, language of Question Paper, and category of the candidate, along with name and address of the JEE Centre allotted.

The admit cards will be sent by Speed Post to the address mentioned in the application form only to all those eligible candidates who have submitted valid application forms, complete in all respects and received at IITs well within the stipulated period. JEE office will not be responsible for any postal delay or irregularity resulting in non-delivery of the admit card. No duplicate admit card will be issued.

The candidate should carefully examine the Admit Card received by him/her for all the entries made therein. In case of any discrepancy, the candidate should inform the issuing institute immediately. You must bring the admit card to the examination centre. Only those candidates, who hold valid admit card, will be allowed to write the examination.

If the Admit Card is not received by March 20, 2010:

You can obtain your registration number and examination centre from the institute of your zone through phone (IVRS – Interactive Voice Response System) / Website (APPENDIX-5). On receiving the data, write your name, registration number and the examination centre on two identical halves of an A4-size paper. Affix your photographs (same version of photograph which you have pasted in your application form) one on each half and sign on the bottom of the photographs. Then get this attested by the Head of your School / Institution last attended / gazetted officer / notary public. Meet the IIT Representative with this paper on the day of examination (April 11, 2010) one hour before the commencement of the examination at the office of the Presiding Officer of the examination centre. The IIT Representative will accept one half and give the other back to you.

1. Identity verification

At the examination hall, the admit card should be presented to the invigilators for verification. The candidate’s identity will be verified with respect to his/her details on the admit card and the centre verification record. If the identity is in doubt, the candidate will not be allowed to appear in the examination. The authorities may at their discretion permit the candidate to appear in the examination after completing formalities including taking of thumb impression and/or biometry. No extra time will be allowed for these formalities to be completed. Any impersonation will lead to disqualification in JEE.

2. Safe-keep of the admit card

Since the successful candidates are required to produce the admit card at the time of counselling and admission, it should be carefully preserved till the admission through JEE-2010 is completed.

IIT Exam 2010 OMR Form Details | IIT Exam OMR Form | IIT JEE 2010 Form problem | IITJEE

You must take a photo copy of this filled-in form duly signed with photograph, etc., and keep it safely with you till the admission procedure is complete. You must also make a note of your application number separately. You have to quote your application number in all future correspondence.

1. The check-list of items to be sent to IIT JEE offices in different zones

a) Completed original OMR application form with photo and signatures.

b) Duly attested photocopy of your 10th class or equivalent examination pass certificate where your date of birth is mentioned clearly. In case, the pass certificate is not available, enclose your admit card and mark sheet of 10th class examination. In case, the 10th class certificate does not mention your date of birth, enclose a copy of an authenticated document mentioning date of birth.

c) Attested copies of category/sub-category certificates (if applicable)

i) Caste certificate in the format as given in the Information Brochure (see APPENDIX-2) for SC/ ST candidates. Certificates in any other format will not be accepted.

ii) If you belong to DS category, enclose a copy of the relevant certificate issued by a competent authority in the Directorate of Resettlement and Rehabilitation, New Delhi (under the Ministry of Defence, Govt. of India) or in the Ministry of Home Affairs, Govt. of India, as applicable.

d) Write your application number in copies of all certificates that you enclose. e) The institute copy of the bank challan (if applicable).

2. Procedure to put the forms in the envelope

* Write all relevant information on the envelope carefully.
* Duly completed OMR application form should be folded only along the original fold (shown in the middle by a dotted line). Make sure that your photograph, your signature and the BARCODE must be on the outer side of the fold.
* Do not staple or paste together the Application Form and the attested copies of certificates. Keep

the photo copies of certificates on the inner side of the folded OMR form.

• While putting the enclosures into the envelope, make sure the BARCODE and the application number on the OMR form are visible through the window of the envelope. This will help us to scan the BARCODE without opening the envelope, as soon as it is received in our office for quick processing.

3. Where and how to send the completed application form

* The envelope containing the completed OMR application form and enclosures should be sent to the IIT located in the zone where you wish to appear for the examination (irrespective of the institute at which you want to seek admission).
* The contact addresses of the zonal IITs to which you should send your envelope with the application are given on the back cover of this brochure.
* The envelope must be sent by Registered Post/ Speed Post only. Do not send it through ordinary post or private courier services. Please keep the postal receipt for future reference.
* One can also submit in person the completed application form at any of the JEE offices at the IITs. Application forms in IIT Delhi zone may be submitted in person at Union Bank of India, SDA Branch, Hauz Khas, New Delhi -16.
* In IIT Madras Zone, the completed application form can be submitted at the same branch of Indian Bank from where you have purchased the form.

4. Last date for receipt of the completed application form

The last date for receipt of the completed Off-line application at the IITs is 5:00 PM on December 19, 2009. Any application received after this date will not be accepted.

Office of JEE is not responsible for any postal delay or irregularity or loss during postal transit.

5. Proof of sending the completed application form

* No acknowledgement card will be sent.
* No claim of submission of the application will be entertained unless it is supported with the photo copies of the postal receipt and of the filled OMR application form.
* No correspondence with regard to the application, eligibility, and admit card will be entertained unless the application number is quoted.
* You can check the status of your application through our websites/SMS/IVRS (see APPENDIX-5) from January 1, 2010.

IIT Exam 2010 Application form | IIT Exam Application | IIT JEE 2010 How to apply | IITJEE Application Form

Candidates are advised to read the eligibility criteria (Section III) carefully. A candidate can apply for JEE-2010 either On-line or Off-line.

1. Applying On-line

Candidates can apply On-line, if they have access to computer, printer and Internet at home or elsewhere, by logging on to JEE website. The site has been designed in a ‘user friendly’ way to help candidates to apply On-line in a step-by-step fashion. On-line application portal will be open from 8:00 AM (IST) on November 1, 2009 to 5:00 PM (IST) on December 7, 2009.

The examination fee is Rs 900/- for GE/OBC/DS candidates and Rs 450/- for SC/ST/PD and female candidates. Candidates can make payment On-line with credit/debit cards of major banks. Payment can also be made through challans of designated banks.

2. Instructions for applying On-line

* Log-on to IIT-JEE Website.
* Go to menu item “Apply-On-line”
* Enter name, date of birth and generate User-ID and Password. Note down the User-ID and Password for future reference.
* Check from the list provided whether you have all the items for applying On-line.
* Enter carefully all the data asked for. Help (Tool-tip) is provided at every stage to fill the form correctly.
* If your parent/guardian has credit/debit card then you can pay On-line by following the instructions on the website.
* If any credit/debit card is not available, then choose the option to pay through bank challan by selecting a bank.
o At this stage the computer will ask you to print the filled-in application form and if you confirm, it will print the following items:
o i. Filled application form with the application number and barcode;
o ii. Bank challan in triplicate (not applicable, if you have already paid through credit/debit card) filled with your application number, name, etc., and also the amount (Rs 900/- if you belong to GE/OBC/ DS or Rs 450/- if you are female or belong to SC/ ST/PD).
o iii. An address-slip to be pasted on an A4 envelope.
* Go to the bank and pay the fee. The bank will return two copies of the challan duly stamped. Keep your copy as proof of payment and attach the institute copy along with the application form printed by you.
* Paste the photograph at the appropriate box. Keep two more copies of the photograph for future use.
* Put your signature and get the signature of your parent/guardian in the appropriate boxes.
* Keep a photo copy of the filled application form along with the photo and signatures for future use.
* Attach an attested photo-copy of the 10th class certificate for proof of your name and date of birth along with the original application form.
* Attach attested photo-copy of SC/ST/DS certificate in the prescribed format (If you belong to these categories).
* Enclose the duly signed request letter (as given in APPENDIX-10) for enlarged font question paper, if applicable.
* Paste the address slip on an A4 envelope, put the application form and all the necessary enclosures, seal the envelope securely and submit in person at the zonal JEE Offices or send it by REGISTERED / SPEED-POST (keep the postal receipt for future reference).
* This completes your On-line application process.
* No acknowledgement will be given for applications. However, you can verify your application status by logging-in with your user-ID and Password after a week. If you see any discrepancy, call us or email us using the details given in the web site/back cover of this brochure.

3. Applying Off-line

Sale of OMR application (Off-line) form and Information Brochure will start from 10:00 AM (IST) on November 16, 2009 and close at 5.00 PM (IST) on December 15, 2009. The application material can be obtained from any of the designated bank branches in each zone listed in APPENDIX-6.

The cost of application material including the examination fee is Rs 1000/- for GE/OBC/DS candidates while it is Rs 500/-for Female/SC/ST/PD candidates.

4. Instructions for applying Off-line

* Read carefully the eligibility criteria (Section III).
* Fill-in the OMR application form as per the guide lines given in Section VII.
* Follow the procedure given in Section VIII for com pleting the application process.

IIT Exam 2010 RESERVATION OF SEATS | IIT Exam | IIT JEE 2010 Reservation Scheme | IITJEE

* Persons with Physical Disability (PD) Benefit of reservation shall be given only to those castes/ tribes which are recognized by the Government of India

and are included in the respective central list published by the Department of Personnel and Training.

1. SC/ST Candidates

For the SC and ST categories, respectively 15% and 7.5% seats are reserved in all IITs, IT-BHU, Varanasi and ISM, Dhanbad. Candidates belonging to these categories are admitted on the basis of a relaxed criterion.

In case all the reserved seats are not filled, a limited number of candidates are admitted to a Preparatory Course of one-year duration on the basis of a further relaxation. This course attempts to prepare the students in Chemistry, Mathematics and Physics. On successful completion of the course, the students will be offered a direct admission to the undergraduate programmes in July 2011, against the unfilled reserved seats for JEE-2010.

Candidates belonging to SC/ST categories, will be required to produce the original caste/ tribe certificate issued by a competent authority in the prescribed format (APPENDIX–2). Certificates in any other format will not be accepted. These documents must be produced at the time of counselling, failing which they will not be considered for admission. Seats remaining vacant in these categories shall not be filled by candidates belonging to any other category.

2. OBC Candidates

For the purpose of reservation of seats in JEE-2010, a candidate will be considered as OBC only if he/she belongs to the non-creamy layer of this category. Those belonging to the creamy layer of OBC are not entitled for reservation.

For candidates belonging to OBC (non-creamy layer), 27% of the seats are reserved in all IITs, IT-BHU, Varanasi and ISM, Dhanbad and are allotted based on a relaxed criterion.

In case any of the reserved seats in this category are not filled, they can be filled by candidates belonging to GE category.

The OBC candidates (non-creamy layer) will be required to produce the original caste certificate issued on or after January 1, 2010 by a competent authority in the prescribed format (APPENDIX–3). Certificates in any other format will not be accepted. The certificate must be produced at the time of counselling, failing which they will NOT be considered for admission in the OBC category.

3. Persons with Disability (PD)

For PD, including leprosy-cured candidates, who are otherwise fit to pursue the course, and qualify JEE with relaxed norms relevant to this category, 3% seats are reserved in each of the categories (namely, GE, OBC, SC, & ST) as specified by the Government of India. In case all the reserved seats are not filled, a limited number of candidates are admitted to a Preparatory Course of one-year duration on the basis of a further relaxation.

For any category of disability (viz., locomotor, visual, speech, and/or hearing) benefit would be given to those who have at least 40% physical impairment.

The candidates in this category will be required to be certified by a medical board constituted by IIT during counselling. The decision of medical board is final.


Two seats are available for preferential allotment in each institute for children of defence/paramilitary personnel killed or permanently disabled in action during war or peacetime operations (DS category).

Candidates belonging to DS category, should submit a copy of the relevant certificate issued by a competent authority in the Directorate of Resettlement and Rehabilitation, New Delhi under the Ministry of Defence, Govt. of India or in the Ministry of Home Affairs, Govt. of India, as applicable, along with the application. To avail this preferential allotment, he/she must qualify in the General (GE) Category and should produce the original certificate at the time of counselling.

IIT Exam 2010 Eligibility | IIT Exam | IIT JEE 2010 Eligibility | IITJEE

Candidates must make sure that they satisfy all the eligibility conditions given below for appearing in JEE-2010:

1. Date of Birth

The date of birth of candidates belonging to GE, OBC and DS categories (refer Section IV & V for details) should be on or after October 1, 1985. Whereas the date of birth of those belonging to SC, ST and PD categories should be on or after October 1, 1980.

The date of birth as recorded in the high school/first Board/ Pre-University certificate will be accepted. If the certificate does not mention the date of birth, a candidate must submit along with the application, an authenticated document indicating the date of birth.

2. Year of passing Qualifying Examination (QE)

A candidate must have passed the QE for the first time, after October 1, 2008 or in the year 2009 or will be appearing in 2010.

Those who are going to appear in the QE later than October 1, 2010 are not eligible to apply for JEE-2010. The qualifying examinations (QE) are listed below:

i) The final examination of the 10+2 system, conducted by any recognized central / state Board, such as Central Board of Secondary Education, New Delhi; Council for Indian School Certificate Examination, New Delhi; etc.

ii) Intermediate or two-year Pre-University examination conducted by a recognized Board / University. iii) Final examination of the two-year course of the Joint Services Wing of the National Defence Academy. iv) General Certificate Education (GCE) examination (London / Cambridge / Sri Lanka) at the Advanced

(A) level. v) High School Certificate Examination of the Cambridge University or International Baccalaureate Diploma of the International Baccalaureate Office, Geneva. vi) Any Public School/Board/University examination in India or in any foreign country recognized as equivalent to the 10+2 system by the Association

of Indian Universities (AIU). vii) H.S.C. vocational examination. viii) Senior Secondary School Examination conducted

by the National Institute of Open Schooling with a minimum of five subjects. ix) 3 or 4 year Diploma recognized by AICTE or a state Board of technical education.

In case the relevant qualifying examination is not a public examination, the candidate must have passed at least one public (Board or Pre-University) examination at an earlier level.

3. Minimum Percentage of Marks in QE

Candidates belonging to GE, OBC and DS categories must secure at least 60% marks in aggregate in their QE. Whereas, those belonging to SC, ST and PD categories must secure at least 55% marks in aggregate in the QE.

The percentage of marks awarded by the Board will be treated as final. If the Board does not award the percentage of marks, it will be calculated based on the marks obtained in all subjects listed in the mark sheet. If any Board awards only letter grades without providing an equivalent percentage of marks on the grade sheet, the candidate should obtain a certificate from the Board specifying the equivalent marks, and submit it at the time of counselling/ admission. In case such a certificate is not provided then the final decision rests with the Joint Implementation Committee of JEE-2010.

4. Important Points to note

(i)One can attempt JEE only twice, in consecutive years. That means one should have attempted JEE for the first time in 2009 or will be appearing in 2010.

(ii)Those who have accepted admission after qualifying in JEE in earlier years by paying full fees at any of the IITs, IT-BHU, Varanasi or ISM, Dhanbad, are NOT ELIGIBLE to write JEE at all irrespective of whether or not they joined in any of the programmes.

(iii) The year of passing the Qualifying Examination is the year in which the candidate has passed, for the first time, any of the examinations listed above, irrespective of the minimum percentage marks secured.

(iv)The offer of admission is subject to verification of original certificates/ documents at the time of admission. If any candidate is found ineligible at a later date even after admission to an Institute, his/ her admission will be cancelled automatically.

(iv)If a candidate is expecting the results of the QE in 2010, his/her admission will only be provisional until he/she submits the relevant documents. The admission stands cancelled if the documents are not submitted in original to the concerned institute before September 30, 2010.

(v)If a candidate has passed any of the examinations, listed in Sub-section III.2, before October 1, 2008, he/she is not eligible to appear in JEE-2010.

(vi)If a Board invariably declares the results of the QE late (only after September 30, every year), the candidate is advised to attempt JEE in 2011 or later.

(vii) The decision of the Joint Admission Board of JEE2010 regarding the eligibility of any applicant shall be final.

More About IIT Exam 2010 | IIT Exam | IIT JEE 2010 | IITJEE

The details of the pattern and the dates of examination, eligibility criterion and how to apply are outlined below:

1. Schedule of JEE-2010

The examination will be held on Sunday, the April 11, 2010 as per the schedule given below:

Paper-I: 9:00 AM – 12:00 Noon (IST)

Paper-II: 2:00 PM – 5:00 PM (IST) The schedule will remain unaltered even if the above date is declared a public holiday.

2. Type of Examination

There will be two question papers, each of three hours duration. Both the question papers will consist of three separate sections on Chemistry, Mathematics and Physics.

Questions in these papers will be of objective type. The answers for each of the questions are to be recorded on a separate specially designed machine-gradable sheet of paper (ORS – Optical Response Sheet). While answering each of the questions the candidate is expected to darken the bubble against correct answer(s) using hard black (HB) pencils only. In some sections, incorrect answers may be awarded negative marks.

The detailed syllabi based on which JEE-2010 will be conducted, for the three subjects, namely, Chemistry, Mathematics and Physics are given in APPENDIX-1.

3. Choice of Language of Question Paper

A candidate can opt for question papers either in English or in Hindi. This option should be exercised while filling the application form. It cannot be changed at any later stage.

4. Choice of Font of Question Paper

Candidates with poor vision can ask for question paper with enlarged font. They must send a request letter addressed to the Chairman, JEE of the respective zones along with the application form. The format of the letter is given in APPENDIX-10.

5. Cities/Towns of JEE-2010 centres

JEE-2010 will be conducted in major cities and towns of India as well as in Dubai. The list is given in APPENDIX-4. While applying, candidates should choose any two towns/cities in the same zone.

Efforts will be made to allot candidate’s first or second choice. However, in some exceptional circumstances, a different city in the same zone may be allotted.

Requests for a change of centre within a city, will not be entertained. However, under exceptional circumstances, a change of city within the zone or outside the zone may be permitted with a request letter. The letter should clearly indicate the Registration Number with valid reasons for the change and should be received on or before March 28, 2010 along with a draft of Rs. 500/- (Rs. 250/- for SC/ST/ PD candidates) drawn in favour of “Chairman, JEE” of the concerned IIT. The application should be sent to the IIT from where the candidate received the admit card. In this regard, the decision of the Chairman, JEE-2010 will be final.

6. Use of calculating and communication aids

Use of electronic devices like mobile phone, calculator, I-Pod etc. is NOT PERMITTED in JEE-2010. Materials like Log table, book, notebook, etc. should not be brought into the examination hall.

IIT Exam 2010 Introduction | IIT Exam | IIT JEE 2010 | IITJEE

The Indian Institutes of Technology (popularly known as IITs) are institutions of national importance established through an Act of Parliament for fostering excellence in education. There are fifteen IITs at present, located in Bhubaneswar, Bombay (Mumbai), Delhi, Gandhinagar, Guwahati, Hyderabad, Indore, Kanpur, Kharagpur, Madras (Chennai), Mandi, Patna, Punjab, Rajasthan and Roorkee. Over the years IITs have created world class educational platforms dynamically sustained through internationally recognized research based on excellent infrastructural facilities. The faculty and alumni of IITs continue making huge impact in all sectors of society, both in India and abroad. Institute of Technology, Banaras Hindu University (IT-BHU), Varanasi and Indian School of Mines University (ISM), Dhanbad, are the oldest institutions in India and are known for their immense contributions towards society at large and for science and technology in particular.

The primary objectives behind such institutions are to:

* Build a solid foundation of scientific and technical knowledge and thus to prepare competent and motivated engineers and scientists.
* Create environment for freedom of thought, cultivate vision, encourage growth, develop personality and self-discipline for pursuit of excellence.
* Kindle entrepreneurial streak. All of the above help to prepare the students admitted to these institutions for successful professional and social

lives. Today, alumni of these institutions occupy key positions in industry and academia in India and abroad. Each institute has well-equipped modern laboratories, state-of-the-art computer network and well stocked technical library. Teaching methods rely on direct personal contact between the teachers and the students and the use of traditional and modern instructional techniques. Students live in a pleasant and intellectually stimulating environment with people having similar goals and aspirations, which is an exciting and unique experience.

Credit-based academic programmes offer flexibility to students to progress at their own pace. A minimum level of performance is necessary for satisfactory progress. The medium of instruction is English. These institutions offer courses leading to Bachelor’s degree in a number of engineering, technological and scientific disciplines.

M.Sc. Integrated courses in pure and applied sciences and M.Tech. Integrated courses in a few disciplines are also offered by some of these Institutions. In addition, some IITs offer Dual-Degree M.Tech. programmes.

The admissions to the Undergraduate Programmes at these institutions for all Indian and Foreign nationals are made through the Joint Entrance Examination (JEE).

IIT Exam 2010 Important Details | IIT Exam | IIT JEE 2010 | IITJEE

Candidates for JEE-2010 have options to apply either On-line or Off-line.

* The Fee for On-line application for GE/OBC/DS candidates is Rs 900/- and for SC/ST/PD/Female candidates is Rs 450/-. For On-line submission, visit JEE websites (APPENDIX-5, inside of back cover).

* The fee for Off-line application form for GE/OBC/DS candidates is Rs 1000/- ( in light blue envelope) and for SC/ST/PD/Female candidates is Rs 500/-.(in light green envelope).

Please go through the following general information on filling and submitting of Off-line application form.

1. Ensure that you fulfill all eligibility criteria given in Section III.

2. Submit only one application form. If you submit more than one, your application for JEE-2010 will be rejected.

3. A machine will process the OMR application form by picking up only the dark pencil marks. Therefore darken the bubbles corresponding to the letters or numerals using HB pencil only. Please go through Section VII for details.

4. Choose two cities, where you want to write JEE-2010, belonging to the same zone from the list given in APPENDIX-4.

5. Options once selected in the application form cannot be changed at a later stage.

6. Note down the OMR application form number (printed near the barcode) and quote this application number in all your future correspondences.

7. Completed application form with all enclosures must be sent to the respective zonal IITs by Registered Post / Speed Post only. For further details see Section VIII.

8. No acknowledgement card will be sent. However, you may check the status of your application on the JEE websites, IVRS and through SMS.

9. Your application must be complete in all respects. Incomplete application forms or application forms filled in a language other than English will be summarily rejected.

10. The application fee is non-refundable.

Note: The Courts at Chennai alone shall have the jurisdiction to settle and decide all matters and disputes related to JEE-2010 as IIT Madras is the organizing Institute.

IIT Exam 2010 | IIT Exam | IIT JEE 2010 | IITJEE


For admission to undergraduate courses at all IITs, IT-BHU, Varanasi and ISMU Dhanbad

Examination Schedule

April 11th, 2010 (Sunday):
Paper 1: 09.00 -12.00 hrs
Paper 2: 14.00 -17.00 hrs

Paper-1 and Paper-2 will each have separate sections in Chemistry, Mathematics and Physics. Both papers will be of objective type, designed to test comprehension, reasoning and analytical ability of candidates.

Syllabus for this examination will be available on the websites of all IITs. The candidate will have the option of submitting the application form either on-line or off-Line. Important dates regarding Application Form and Brochure:

On·line application process : Sun. Nov. 01, 2009 -Mon. Dec . 07. 2009
Off-line application process: Mon. Nov. 16, 2009 -Tue. Dec. 15, 2009

Last date for receipt of completed hardcopy of application forms at IITs: Sat. Dec. 19, 2009

Further details regarding the application process will be published in leading National Dailies and Employment News/Rozgar Samachar on Sat. Oct. 31, 2009.


NMAT 2010 Admission Procedure | NMAT MBA Exam Selection Process

Admission Criteria & Selection Process

All those who registered successfully will be called for the NMAT, provided they satisfy condition of eligibility. It is the sole responsibility of the candidates to check that he/she is eligible as per the criteria. The final merit list will be prepared on the basis of NMAT Score, Group Discussion, Personal Interview, Presentation (as applicable) and work experience. The selection criteria will be based on merit. The cut-off for deciding the merit shall lie solely with NMIMS University. In this regard, the decision of the NMIMS University will be final and undisputable and shall be binding on all concerned.

(Note: 15% seats are reserved for Management Quota in each course out of total intake).

1) Selection Process for : Full Time MBA – Core MBA Actuarial Science MBA Banking Management MBA Capital Market
Entrance Test (NMAT)
Group Discussion & Personal Interview
Candidates applying for multiple programmes stated above will have to undergo Group Discussion/Personal Interview with MBA Core programme. Those candidates who have applied for multiple programmes namely, MBA Actuarial, Banking & capital their selection will be based on the merit score obtained by them as well as on the availability of the seats.

2) Selection Process for :
MBA Pharmaceutical Management Entrance Test (NMAT) Group Discussion, Personal Interview & Presentation

Candidates have to undergo a separate Group Discussion/Personal Interview & Presentation for MBA Pharmaceutical Management Programme. A separate merit list will be drawn for MBA Pharmaceutical Management.

3) Selection Process for:
Ph.D. Management Entrance Test (NMAT) Presentation & Personal Interview

Candidates have to undergo a separate Presentation & Personal Interview for Ph.D. Management Programme. A separate merit list will be drawn for Ph.D. Management.

4) Selection Process for :
Part Time MBA: Entrance Test (NMAT) Personal Interview

Candidates have to undergo a separate Personal Interview for Part Time MBA Programme. A separate merit list will be drawn for Part Time MBA.

5) Selection Process for :
Full Time EPGDBM (Bangalore Campus): Entrance Test (NMAT) Group Discussion & Personal Interview

Candidates have to undergo a separate Group Discussion & Personal Interview for EPGDBM. A separate merit list will be drawn for EPGDBM.

NMAT 2010 Eligibility | NMAT MBA Exam Eligibility 2010


Bachelor’s Degree (10+2+3) in any discipline from a recognized University with minimum 50% marks in the aggregate. Two years post qualification work experience will be preferred. Candidates appearing final year degree exam can also apply.
MBA Actuarial Science

Candidates should have attained any of the following Educational Standards with minimum 50% marks in aggregate at graduation/post graduation degree level examination.

a. Bachelor’s Degree (10+2+3) in Statistics / Mathematics / Engineering / Economics / Computer Science / Allied Sciences with minimum 50% marks in Aggregate. Two years post qualification work experience will be preferred.

b. Graduate or Post Graduate with Mathematical subjects. For this purpose following subjects constitute mathematical subjects :

* Mathematics or any of its branches

* Statistics or any of its sub classification such as Mathematical Statistics and Applied Statistics

* Economics

* Computer Science

* Any discipline of Engineering

* Subject in Science such as Physics or its allied branches

c. Candidate with graduation / post graduation from other disciplines should have passed 10+2 (H.S.C.) or equivalent with at least 85% in Mathematics / Statistics.

d. Fully qualified members of following professional bodies are also eligible.

* The Institute of Chartered Accountants of India (ICAI)

* The Institute of Cost and Works Accountant of India (ICWAI)

MBA Banking Management & MBA Capital Market

Bachelor’s Degree (10+2+3) in any discipline from a recognized University with minimum 50% marks in the aggregate. Two years post qualification work experience will be preferred.
MBA Phamraceutical Management

Bachelor’s Degree (10+2+3) in Life Sciences/Pharmacy, Microbiology and biotech, bio-chemistry from a recognized University with minimum 50% marks in the aggregate. Also Post Graduates in Sociology/psychology/Economics/Anthropology are eligible. Two years post qualification work experience will be preferred.
Ph.D. Programme

A. The students may be drawn from those with qualifications from any of the streams listed below:

* Master’s degree or equivalent in relevant disciplines like humanities, social sciences, pure sciences and Commerce, from a recognized university/ deemed university/ institution recognized by Association of Indian Universities (AIU).

* Post-graduate Diploma in Business Administration, considered equivalent to MBA by AIU.

* Minimum Marks required: 60% marks or equivalent CGPA at PG level.

* Work Experience:

At least 5 years full time work experience in executive or supervisory capacity after obtaining Master’s Degree.

D. Engineering students with 65% marks or equivalent CGPA at degree level with 5 years work experience in Academic / Academic Institution / Research / Corporate.

Teaching Assistantship of Rs. 25000/- will be available to students for period of 4 years, in addition there would a academic fee waiver. Research grants of Rs. 10,000/- per annum for Ph.D. Research.
Eligibility Criteria for Part Time MBA

Bachelor’s Degree (10+2+3) in any discipline from recognized University OR Equivalent pattern recognized by the UGC & AIU. Three Years Post qualification work experience in Supervisory/Executive Cadre as on 31st December 2009 is essential.
Eligibility Criteria for Full Time EPGDBM(Bangalore Campus)

Bachelor’s Degree (10+2+3) in any discipline from recognized University OR Equivalent pattern recognized by the UGC & AIU with minimum 50% marks in the aggregate. Five Years Post qualification work experience in Supervisory/ Executive Cadre as on 31st December 2009 is essential.
Following criteria is common for all programme

a) The candidate must hold a Bachelor’s Degree, with at least 50% marks or equivalent CGPA in aggregate from any of the Universities incorporated by an act of the central or state legislature in India or other educational institutions established under section 3 of UGC Act, 1956, or possess an equivalent qualification recognized by the Ministry of HRD, Government of India.

b) The Bachelor’s Degree or equivalent qualification obtained by the candidate must entail a minimum of three years of education after completing higher secondary schooling (10+2) or equivalent. The percentage obtained by the candidate in the bachelor’s degree would be based on the practice followed by the university/institution from where the candidate has obtained the degree.

c) In case of the candidates being awarded grades/CGPA instead of marks, the equivalence would be based on the equivalence certified by the university / institution from where they have obtained bachelor’s degree. In case the university/institution does not have any scheme for converting CGPA into equivalent marks, the equivalence would be established by NMIMS by dividing obtained CGPA with the maximum possible CGPA and multiplying the resultant with 100.

d) Candidates appearing for the final year of bachelor’s degree / equivalent qualification examination and those who have completed degree requirement and are awaiting results can also apply. But their admission will be subject to their fulfilling the eligibility norms as mentioned above.

NMAT 2010 | NMAT MBA Exam 2010 | NMIMS NMAT 2010

NMAT (effective from 2010) is now an online admission test conducted in India and abroad during a predetermined 10 days period for admission to the following programs:

* MBA Core
* MBA (Pharmaceuticals Management)
* MBA (Actuarial science)
* MBA (Capital Markets)
* MBA (Banking)
* MBA (Part - Time)
* Ph.D Program in Management

For more NMAT 2010 Info see below:

* Eligibility
* Selection Process
* Prospectus
* Online Registration


The selection of candidates for Postgraduate courses will be according to the directives of the CMC Vellore Council. Fifty percent of seats in each course are reserved for sponsored candidates, provided they fulfill other criteria for eligibility for admission. However, more than 50% of the available seats may be allotted to sponsored candidate based on their ranking in the selection test. The wait list is based on ranking in the selection tests. The first sponsored candidate on the waiting list will ordinarily fill vacancies arising by sponsored candidates not accepting a seat to make up 50% reservation for sponsored candidates. In the event that more than 50% of the seats in any course are filled by sponsored candidates and one of the sponsored candidates does not accept the seat, it will be offered to the next candidate on the wait list by rank irrespective of whether he or she is sponsored or open. No admissions will be made after 25th May 2010.

Candidates for all medical Post Graduate courses (MD /MS/ Diploma) conducted by the College are ranked on the basis of a written test, practical tests and interview.

2. The written test will be of 2 types:
a. A GENERAL paper consisting of multiple choice questions drawn from all subjects taught in the undergraduate medical course.

b. A SPECIAL paper consisting of multiple choice questions in the specialty for which the candidate has applied and subjects allied to it e.g., the paper for E.N.T. may include questions in anatomy, physiology, biochemistry, etc., with respect to the ear, nose and throat.

download CMC Vellore PG admission bulletin - click here

CMC Vellore 2009 Eligibility, CMC Vellore Exam 2009 Eligibility Qualification

MD / MS / Diplomas
Candidates who have qualified for the M.B.B.S Degree of the Madras University or any other University recognised as equivalent by the Tamil Nadu Dr. MGR Medical University and the Indian Medical Council and have completed their compulsory rotating residential internship and obtained full registration before 15/05/2010 are eligible to apply for the postgraduate diploma and degree courses.

Candidates who have qualified for a postgraduate diploma may also apply for the postgraduate degree (MS/MD) course in the same subject. Post Diploma candidates with a diploma in the same subject need to undergo 2 years of training for the degree. Note: Those who complete a DCP will not have this benefit for MD Pathology.

Candidates currently pursuing a postgraduate training programme and who complete the same by the 15th of May 2010 will be eligible to apply.

Residency in Medical Physics

MSc degree in Medical Physics or a Post-graduate diploma in Hospital Physics (Dip R.P) from BARC, Mumbai

CMC Vellore 2009 Application form, CMC Vellore Exam 2009 Application

Application form, admission bulletin and prospectus can also be had from the office of the registrar on payment of Rs. 500/- as Demand Draft payable at Vellore favouring ‘CMC Vellore Association a/c’, or as challan mentioning FC-CMC-V at any branch of the ICICI bank in India.

Send the DD or original challan with a request for a Medical PG prospectus for 2010 to Office of the Registrar, CMC, Thorapadi PO, Vellore-2. State your full postal address with pin-code (Telephone number and e-mail address if available).

Last date for receipt of the filled application: 31.10.2009

Entrance tests on 28.11.2009 (at Bangalore, Chennai, Chandigarh, Delhi, Hyderabad, Kolkata, Mumbai, Puducherry, Trivandrum and Vellore)

Special tests and interviews at Vellore for those short-listed on 05.01.2010

Medical PG Courses commence on 01.03.2010

CMC Vellore 2009, CMC Vellore Exam 2009, CMC Exam 2009 Vellore

Medical PG Admissions-2010

Applications are invited for Medical Post Graduate courses (MD/MS/Diploma) and Residency in Medical Physics commencing in 2010

31 Oct 2009 Last date for receipt of completed application forms
07 Nov 2009 Last date for receipt of completed sponsorship forms
28 Nov 2009 Written test
03 Dec 2009 Announcement of list of candidates who qualify for interviews
04 Jan 2010 Registration for Interviews & Medical Checkup
05 Jan 2010 Special Tests and Interviews at Vellore.
06 Jan 2010 Announcement of final selection list.
07 Jan 2010 Acceptance by 8.00 am
26 Feb 2010 Registration
01 Mar 2010 Courses begin
** Dates are subject to change

Course details/eligibility criteria/Admission bulletin/Online application form available at website home.cmcvellore.ac/admissions/admin.htm

For more info see:

UPSC CDS 2010, CDS Exam 2010, UPSC CDS Exam 2010

Candidates to ensure their eligibility for the examination:
The candidates applying for the examination should ensure that they fulfill all eligibility conditions for admission to the examination. Their admission at all the stages of the examination will be purely provisional subject to satisfying the prescribed eligibility conditions.

Mere issue of admission certificate to the candidate will not imply that his/her candidature has been finally cleared by the commission

Commission take up verification of eligibility conditions with reference to original documents only after the candidate has qualified for interview/personality test

Application form:
Candidates must apply in the Common Application Form devised by the Commission for its examinations, which can be purchased from the designated head post offices/post offices (specified in appendix-III of the notice) throughout the country against cash payment of Rs 20/- (Rupees twenty only). Each such form can be used only once and only for one examination. In case of any difficulty in obtaining application forms from the designated HPOs/Pos, the candidates should immediately contact the concerned post master or UPSC’s “Forms supply monitoring cell” over telephone no. 011-23389366/Fax no. 011-23387310

Candidates are advised to read carefully the ‘Instruction for filling up the application form’ given in appendix-II of this notice.

For more info see following links:

CDS Exam 2010 Scheme of CDS Examination, UPSC CDS Exam 2010 Scheme

For admission to Indian Military Academy, Naval Academy and Air Force Academy

English, Duration – 2 hours, Maximum marks – 100
General Knowledge, Duration – 2 hours, Maximum marks – 100
Elementary Mathematics, Duration – 2 hours, Maximum marks – 100

For admission to Officers Training Academy

English, Duration – 2 hours, Maximum marks – 100
General Knowledge, Duration – 2 hours, Maximum marks – 100

UPSC CDS 2010 Qualification, CDS Exam 2010 Educational Qualification

(i) For IMA and Officers Training Academy – Degree of a recognized university or equivalent

(ii) For Naval Academy – B.Sc (with Physics & Mathematics) or Bachelor of engineering

(iii) For Air Force Academy – Degree of a recognized university (with Physics and Mathematics at 10+2 level) or Bachelor of engineering

Graduates with first choice as Army/Navy/Air force are to submit proof of graduation provisional certificates on the date of commencement of the SSB interview at the SSB

Candidates who are studying in the final year degree course and have yet to pass the final year degree examination can also apply but they will be required to submit proof of passing the degree examination to reach the Army HQ/Rtg. CDSE Entry, West Block III, R.K. Puram, New Delhi-110066 in case of IMA/SSC first choice candidates and Naval HQ ‘DMPR’, (OI & R section) room no, 204, ‘C’ wing, Sena Bhawan, New Delhi-110011 in case of Navy first choice candidates and PO3(A)/Air Headquarters, ‘J’ Block, Room No. 17, Opp. Vayu Bhawan, Motilal Nehru Marg, New Delhi-110011 in case of Air Force first choice candidates by the following dates failing which their candidature will stand cancelled

(i) For admission to IMA, Naval and Air Force Academy on or before 13th November, 2010

(ii) For admission to Officers Training Academy, Chennai on or before 01st February, 2011

Candidates possessing professional and technical qualifications which are recognized by government as equivalent to professional and technical degrees would also be eligible for admission to the examination.

Note 1: Candidates, who have yet to pass their degree examination will be eligible only if they are studying in the final year of degree examination. Those candidates who have yet to qualify in the final year degree examination and are allowed to appear in the UPSC examination should note that this is only a special concession given to them. They are required to submit proof of passing the degree examination by the prescribed date and no request for extending this date will be entertained on the grounds of late conduct of basic qualifying university examination, delay in declaration of results or any other ground whatsoever.

Note 2: Candidates who are debarred by the Ministry of Defence from holding any type of commission in the Defence Services shall not be eligible for admission to the examination and if admitted, their candidature will be cancelled

Note 3: In the event of air force candidates being suspended from flying training for failure to learn flying, they would be absorbed in the navigation/administration/logistic branch of the IAF. This will be subject to availability of vacancies and fulfilling the laid down qualitative requirements (including 60% in graduation)

Fee: A candidate seeking admission to examination must pay the commission a fee of Rs 100/- (Rupees one hundred only) through a single central recruitment fee stamp of the requisite denomination. Central recruitment fee stamp (not postage stamps) may be obtained from the post office and affixed firmly on the application form in the space provided therein. The stamp must be got cancelled from the issuing post office with the date stamp of the post office in such a manner that the impression of the cancellation mark partially overflows on the application form itself but within the space provided on the form. The impression of the cancellation mark should be clear and distinct to facilitate the identification of data and the post office of issue.

All female candidates and candidates belonging to SC/ST are not required to pay any fee. No fee exemptions is, however, available to OBC candidates and they are required to pay the full prescribed fee.

UPSC CDS 2010 Eligibility, CDS Exam 2010 Eligibility

(a) Nationality: A candidate must either be (i) a citizen of India, or (ii) a subject of Bhutan, or (iii) a subject of Nepal, or (iv) a Tibetan refugee who came over to India before the 1st January, 1962 with the intention of permanently settling in India, or (v) a person of Indian origin who has migrated from Pakistan, Burma, Sri Lanka and East African countries of Kenya, Uganda, the United Republic of Tanzania, Zambia, Malawi, Zaire and Ethiopia or Vietnam with the intention of permanently settling in India.

(b) Age limits, Sex and Marital Status

(i) For IMA – Unmarried male candidates born not earlier than 2nd January, 1987 and not later than 1st January, 1992 only are eligible

(ii) For Naval Academy – Unmarried male candidates born not earlier than 2nd January, 1989 (2nd January, 1987 in case of NCC naval wing ‘C’ certificate holders) and not later than 1st January, 1992 only are eligible

(iii) For Air Force Academy – Unmarried male candidates born not earlier than 2nd January, 1988 and not later than 1st January, 1992 only are eligible

(iv) For Officer’s Training Academy (SSC course for men) – Male candidates (married or unmarried) born not earlier than 2nd January, 1986 and not later than 1st January, 1992 only are eligible

(v) For Officers Training Academy (SSC women non-technical course) – Unmarried women, issueless widows who have not remarried and issueless divorcees (in possession of divorce documents) who have not remarried are eligible. They should have born not earlier than 2nd January, 1986 and not later than 1st January, 1992.

The date of birth accepted by the commission is that entered in the matriculation or secondary school leaving certificate or in a certificate recognized by an Indian University as equivalent to matriculation or in an extract from a Register of matriculates maintained by a university which must be certified by the proper authority of the university or in the higher secondary or an equivalent examination certificate. These certificates are required to be submitted only after the declaration of the result of the written part of the examination. No other document relating to age like horoscopes, affidavits, birth extracts from municipal corporation, service records and the like will be accepted.

CDS Exam 2010 examination centers

Agartala, Ahmedabad, Aizawl, Allahabad, Bangalore, Bareilly, Bhopal, Chandigarh, Chennai, Cuttak, Dehradun, Delhi, Dharwad, Dispur, Gangtok, Hyderabad, Imphal, Itanagar, Jaipur, Jammu, Jorhat, Kochi, Kohima, Kolkata, Lucknow, Madurai, Mumbai, Nagpur, Panaji (Goa), Patna, Port Blair, Raipur, Ranchi, Sambalpur, Shillong, Shimla, Srinagar, Thiruvananthapuram, Tirupati, Udaipur, Vishakhapatnam

The centres and the date of holding the examination as mentioned above are liable to be changed at the discretion of the commission. While every effort will be made to allot the candidates to the centre of their choice for examination, the commission may, at their discretion allot a different centre to a candidate, when circumstances so warrant. Candidates admitted to the examination will be informed of the time table and place or places of examination.

Candidates should note that no request for change of centre will normally be granted. When a candidate, however, desires a change in centre from the one he/she had indicated in his/her application form for the examination, he/she must send a letter addressed to the Secretary, Union Public Service Commission, giving full justification as to why he/she desires a change in centre. Such requests will be considered on merits but requests received after the 25th November, 2009 will not be entertained under any circumstances

UPSC CDS 2010 Name of the Course and approximate no. of vacancies

(i) Indian Military Academy, Dehradun 130th Course commencing in January, 2011 [includes vacancies reserved for NCC ‘C’ certificate (Army wing) holders] - 250 vacancies

(ii) Indian Naval Academy, Ezhimala, course commencing in Jan 2011 Executive (Hydro/General service) [including 06 vacancies reserved for NCC ‘C’ certificate holders (Naval wing) – 40 vacancies (02 for Hydro/38 for Executive (General service)

(iii) Air Force Academy, Hyderabad (Pre-Flying) training course commencing in January, 2011 i.e. No. 189th F(P) course – 32 vacancies

(iv) Officers Training Academy, Chennai 93rd SSC course (for men) commencing in April 2011 – 175 vacancies

(v) Officers Training Academy, Chennai 7th SSC women (Non-technical) course commencing in April 2011 – 18 vacancies

Note: The number of vacancies given above is tentative and may be changed at any stage by service H.Q.

UPSC CDS 2010 Application forms, CDS Exam 2010 Application

Last date for receipt of applications: All applications must reach the “Secretary, Union Public Service Commission, Dholpur House, Shahjahan Road, New Delhi-110069” either by hand or by post/speed post or by courier, on or before the 26th October, 2009

Candidates should notes that applications will be received by hand, only one at a time, at the designated counter(s) and not in bulk, till 5 pm only

However, in respect of candidates residing abroad or in certain remote areas the last date for receipt of applications by Post/Speed Post only (not by hand or by courier) is 03rd November, 2009

Penalty for wrong answers: Candidates should note that there will be penalty (negative marking) for wrong answers marked by a candidate in the objective type question papers

Facilitation counter for guidance of candidates: In case of any guidance/information/ clarification regarding their applications, candidature etc. candidates can contact UPSC’s Facilitation Counter near Gate ‘C’ of its campus in person or over Telephone No. 011-23385271/011-23381125/011-23098542 on working days between 10.00 hrs and 17.00 hrs

Mobile Phones Banes: (a) Mobiles phones, pagers or any other communication devices are not allowed inside the premises where the examination is being conducted. Any infringement of these instructions shall entail disciplinary action including ban from future examinations.
(b) Candidates are advised in their own interest not to bring any of the banned items including mobile phones/pagers to the venue of the examination, as arrangements for safekeeping cannot be assured.

Candidates are advised not to bring any valuable/costly items to the examination halls, as safe keeping of the same cannot be assured. Commission will not be responsible for any loss in this regard.

No. F.8/1/2009-E.I(B)-A Combined Defence Services Examination will be conducted by the Union Public Service Commission on 14th February, 2010 for admission to the under mentioned courses.

Important Dates of UPSC CDS 2010, Schedule CDS Exam 2010,

Date of Notification

Last Date for Receipt of Applications
26th October, 2009

Date/Day of CDS 2010 Examination
14th February, 2010

CAT 2009 Registration, CAT Application, CAT Application Deadline Extended, CAT Exam form 2009

The Common Admission Test (CAT) for entry into the IIMs and 150 other B-schools has not found many takers this year., reports the Economics Times. As per IIMs, the number of candidates registered for CAT has been around two lakh, even as online registration process that was earlier scheduled to close on October 1 has been extended to October 11. Last year, the number of CAT applicants was 2.76 lakh. While the number of CAT applicants has been rising 10% every year, the past three years saw a 20-25% rise in number of candidates.

For those MBA aspirants who were late to catch the CAT 2009 groovy-train, here is another chance! IIMs have announced on September 30 today that they will be extending the sale of CAT vouchers up till October 8, and online registration till October 11. That’s a cool 10 more days!

Reasoning that many bank holidays may hamper the last minute rush of CAT aspirants, IIMs said, “In view of a series of bank holidays that may have inconvenienced some candidates, IIMs and Prometric have extended the sale of CAT 2009 vouchers to 8 October 2009.”

Online registration for CAT 2009, which began on Wednesday, 9 September 2009, will now be open till October 11. Earlier it was supposed to end on Thursday, 1 October 2009. “Candidates will have until 11 October 2009 to complete their online registration and scheduling. The edit feature will also be available until 11 October 2009,” said IIMs on their official website CATIIM.in.

CAT 2009 will be held in a window of 10 days, starting from Saturday, November 28 to Monday December 7, 2009. The test will be held in two slots, Session 1, the morning session will be from 10 AM to 12.30 PM.

Source : Economics Time

IGNOU MBA Results 2009, IGNOU Results MBA 2009, IGNOU MBA Admission Forms

Indira Gandhi National Open University
OPENMAT XXVI RESULT (Management Programme)

Please submit Application form (FORM No. 2) for Admission to Management Programme alongwith the requisite fee and documents at the concerned Regional Centre on or before last dates as mentioned below:

For Ist Semester, 2010 (January, 2010 session) – last date is 30th November, 2009
For IInd Semester, 2010 (July, 2010 session) – last date is 31st May, 2010.

OPEN MAT EXAM XXVI for MBA programme was held on 16-Aug-09.


Engineering News

Central Board of Secondary Education

Architecture News

Management News

Medical News

Journalism News